Krautkramer Branson DME DL Specs Operating Principle: Ultrasonic, pulse-echo measurement method Thickness Measuring Range: 0.025 inch to approximately 12.00 inches; 0.50 mm to approximately 300.0 mm; depending on probe selection and material under test. Material Velocity Range: 39,400 to 393,662 in/s; 1000 to 9999 m/s Displayed Resolution: Four options, selectable via the keypad: 1.) 0.001 inch from 0.025 to 9.999 inches. Over range indicator when greater than 9.999 inches. 2.) 0.01 inch over entire range. 3.) 0.01 mm from 0.60 to 99.99 mm.

Discover ge’s non destructive testing and inspection solutions, including radiography, computed tomography, remote visual inspection, ultrasound and krautkramer usn. Krautkramer USN 60 Operating Manual g. 1-2 Issue AF, 03/2013 Krautkramer USN 60 Introduction 1.1 Safety information The USN 60 is designed and tested according to. Krautkramer DynaPOCKET Issue 03, 04/2005 1-3 About this manual Introduction 1.2 About this manual In the following section you will learn how to use this.

Not available in HI SPD mode. Over range indicator when greater than 99.99 mm 4.) 0. Crear Vista Oracle Con Parametros more. 1 mm over entire range Reading Stability: Nominal measured value ±0.001 inch (0.025mm) over the temperature range of the instrument.

Ge Krautkramer USM 35X Pdf User Manuals. View online or download Ge Krautkramer USM 35X Operator's Manual.

V-Path Error Correction: Automatic, microprocessor controlled Linearity with KBA560 Probe: ±0.002 inch (±0.05 mm) when calibration point is ≤1.0 inch (25 mm); ±0.004 inch (±0.1 mm) when calibration point is >1.0 inch (25 mm). Probe Zero Adjustment: Push-button, keyed to built-in probe zero block T-minimum Set Range: OFF or 0.020 inch to 9.999 inches; 0.5 mm to 300.0 mm. Calibration: One point, off block, with known thickness calibration standard of same material and velocity as material to be measured; probe zero required. Display Update Rate: 4 Hz in 0.001 inch, 0.01 inch, and 0.1 mm resolution modes; 3 Hz in 0.01 mm resolution mode. Measurement Rate: 4 Hz in 0.001 inch, 0.01 inch, and 0.1 mm resolution modes; 3 Hz in 0.01 mm resolution mode; 16 Hz in High Speed Minimum Capture (HI SPD) mode. Reciever Gain Level: Three options, selectable via the keypad: Automatic: High gain will be enabled for material velocities up to 246,000 in.s (6,248 m/s). Low gain will be enabled for velocities over 246,000 in/s.